Wheel brushes

Products \  Wheel brushes
sh6_3.jpg disk16.jpg

Wheel brushes for use on grinders ORG -70-2847-3701- WBG
Rosha” Ltd. produces wheel brushes for use on drills and angle grinders with safe free speeds range from 1500 rpm to 12000 rpm.
These brushes fit to process difficult of access work-pieces to absolute precision. Ideal for removing paint, rust, wire-edge or scale from all types of steel or wooden work-pieces.
These brushes can be made of carbon steel wire, brass wire, stainless steel wire etc. Individual fill of brushes is available.

Wheel brushes for use on grinders ORG -70-2847-3701- WBG
g -available in multiple sizes to suit your job needs
n - amount of sections
L - working surface length mm
A - section thickness mm

#
d D n L
UPM/RPM  p6_2.jpg
g
- изменяется в зависимости от заказа клиента

n - количестро элементов

L - длина рабочей поверхности, mm

A - толщина элемента, mm

704
WBG -22х150х1х25
4500
705
WBG -22х180х1х40
4500
709
WBG -22х150х2х33
4500
710
WBG -22х180х2х40
4500
711
WBG -22х180х2х40
3500
712
WBG -32х150х2х33
4500
713
WBG -32х180х2х40
4500
725
WBG -м14х100х18
6500
726
WBG -м14х100х18
6500
727
WBG -м14х120х28
6500
728
WBG -м14х150х33
4500
729
WBG -м14х118х40
4500
730
WBG -м14х200х50
3500

All operators and other personnel must wear safety goggles (face shields) and working clothes.
Wheel brushes ORG-70-2847-370-WB
disk_2.jpg
# D n L UPM/RPM
801
WB 10х80х2х13
6500
802
WB 10х100х2х23
6500
804
WB 10х110х2х28
6500
806
WB 12х120х2х33
6500
808
WB 22х100х2х18
6500
810
WB 22х115х2х25
6500
812
WB 22х120х2х28
6500
815
WB 40х150х2х25
4500
820
WB 40х180х2х40
4500
822
WB 40х200х2х50
3500


All operators and other person
nel must wear safety goggles (face shields) and working clothes.
Wheel brushes for use on drill ORG-70-2847-3701-FD
sh6_2.jpg

disk_dreli.jpg
# D n L UPM/RPM d
950
FD 60х1х10
4500 8
951
FD 80х1х20
4500 8
952
FD 80х2х13
4500 8
953
FD 100х2х23
4500 8
952
FD 115х2х25
4500 8
953
FD 120х2х28
4500 8
954
FD 125х2х30
4500 8
955
FD 140х2х28
4500 8
956
FD 150х2х33
4500 8

All operators and other personnel must wear safety goggles (face shields) and working clothes.
Polypropylene wheel brushes (pile cross-section 1,5 - 3,5 mm)

inner diameter, mm outer diameter, mm poliprop.jpg
110 500
118/120/130 550
160 650
180 700
200 750
254 915
280 900

All operators and other personnel must wear safety goggles (face shields) and working clothes.